Opticron Rubber Objective Lens Covers 50mm OG S Pair fits models with Outer Diameter 56~58mm

Yes, they seem somewhat overpriced for what they are: two little rubber rings with attached caps. But I must say: they are an absolutely perfect fit to the objective lenses of the Leica Ultravid 8x20 Binos - and are FAR better than the Leica originals (which required attachment to the neck strap if you wanted to keep from losing them, plus were "loose-fitting" to boot). These Opticron 30-31 mm caps not only fit just right, they won't get lost - and do not interfere in any way with the ability to keep them mounted when inserting the binoculars back into the case. (And yes, they do also perfectly fit the eyepieces - I may have to get yet another pair... ( sigh - :) ).

Bought the 30-31 as website suggested but had to return them because they were too small. If you have the Bushnell 12 x 25 get the 32. They fit great.

I checked with Opticron before purchasing, Pete was right on! They fit my Swarovski CL Curio 7x21 binoculars perfectly and the quality seems good.

Using these on Zeiss Terra ED 8x42 (choose outer Diameter 53~55mm). The loops that go around the objective tubes are a little loose but shouldn't slip off. The lens covers have a good heft. The fit is snug enough so that the caps don't fall off, but also push on easily.

This was a replacement for my Opticron 10x25 lens cover and fit perfectly.

It fits like a champ and is made of quality material.

I bought these as objective lens covers for my Leica Ultravid 8x20 compact binoculars. They are a good fit and work on the eyepiece side as well. The Leica's come with eyepiece covers, but they must be used either loose or attached to the strap. I prefer to keep these as pocketable as possible, so I don't use the strap. So I'm getting an extra set to use on the eyepiece side as well. Note, however, that using them on the eyepiece side means that either they sit a bit awkwardly on the pull-out eyecups OR they have to sit on the barrels where they will ever so slightly hit the Ultravid's wonderful and delightfully oversized focus knob and prevent the binoculars from fully folding up (it's about a 2mm difference in total). No impact on folding up if used only on objective end.Since the Leica Monovid 8x20 is basically a single tube Ultravid, I tried the lens cover on the Monovid object as well and it's a great fit. Moreover, it's slim enough that the Monovid will still fit in it's leather carrying case with the objective cover left on! My previous solution, a hard plastic flip cover suggested on some sport optics forums, is more durable but precludes the use of the Leica carrying case when mounted. It's also much stiffer and harder to open (it's really designed as a cover for a rifle scope). This Opticron cover is a much better solution for a birder like me.The material grips well to both the rubber armored Ultravid (I have the BR model) as well as the metal barrel of the Monovid.Pricewise, these are a bit expensive, but there's almost nothing else out there at such a compact size.So I'm buying two more pairs: one to use on the Ultravid eyepieces and another to put on the Monovid.

The hinge on the original objective lens covers wore out and broke through on my Celestron 8 x 42 Trailseeker ED binoculars. Extensive searching for replacements, including contacting Celestron, was to no avail. Then I found Opticron products and they appeared to be the sole manufacturer including the measurement of objective outer diameter for fitment. The outer diameter on my binoculars is 51mm, so I ordered the replacements that fit 51-52mm. Although they work just fine, they do not fit as snug as the originals. The I.D. of the originals is 50.3mm, and the replacement I.D. measures 51.0 mm. Without having tried them, perhaps the 50-51mm Opticron replacements would fit more snugly as the originals. But can't say if they would be too tight. At any rate, these work well and are the only replacement I could find. Three stars for value - these were more expensive than other replacements- and accuracy - these would be snugger on the 52mm O.D. end of the fit range. The originals had a 0.7mm interference versus none for these on my binoculars. Durability has been great, but I haven't had these for as long as the originals.