AbatronWoodEpox Kit - 12 oz - 2-Part Structural Epoxy Adhesive Filler - Wood Filler Putty

Used in multiple place damaged on our deck. A professional repair person had done some work for us in the past and used this product with outstanding results. Decided to see if I could do the same. Lo and behold, success. Easy to use and very good results. In a couple of spots I had to thin the epoxy with the liquid wood epoxy to get the desired result. This was not a problem. Finishes well and paints great. Some people have used Bondo. Don’t bother.

Why did you pick this product vs others?:Amazing product. Dries hard, easy to sand, great product.

Works great. Mix together in equal parts gets as hard as wood and fast

Overall, it is a good product that drys into a very stable substance that is very hard, tool-able, and paint-able.But, it doesn't work like the traditional putties that I've used. It is not always easy to work , because of it's stiff , yet still pliable consistency.So, once I pressed it into the hole I was filling, it was difficult to trowel it down with a putty knife, in order to level it off to the hole's upper edge.So, since I didn't realize how hard it would be to level it with a putty knife, I ended up putting too much woodepox in the hole. Normally, I think most people would rectify this issue by aggressively sanding it down to the hole's edge, and the level of the the item being filled, but I was working in a very tight fitting area, which had no room for aggressive sanding. So, I don't recommend using this product in a very tight area, unless you don't care about how it will look, and just want a functional fill that does the job of keeping the area protected from the elements. And, I also don't recommend using this product in an area that is difficult to access with an electric sander, because if you put in in too high, then you're stuck with it being too high. On the flip side, it is easy to mix, and can be done by hand,. I spooned equal portions of part A and B onto a board, and then picked it up with my hand, and mixed it by hand , while wearing latex gloves. No accurate measuring is necessary, and eye- balling the equal proportions is adequate, and I've had no problems with getting the right amounts .. So , while mixing, and kneading it by hand, it is ready to use when there is a uniform color throughout, with no streaking that is caused by one of the parts not being completely mixed in. So, when it is uniform in color, and feels like a stiff, yet pliable clay , it is ready to be pushed into the opened area.. Overall, this material dries to an amazingly hard substance that looks as though it will last for years. But, learning how to work it, at least for myself, will take more practice.

Never used this stuff before but it was recommended to me for repairing wood joints. It was easy to use and did a great job on filling the wood joints

Used to fix large hole left by dog door, worked great!

Seems like it will never work. But it seems to be holding strong. Not very stainable. Does not blend in well. Very easy to sand.

Best product ever~!You should use this for any wood work.This doesn't come with the resin, so make sure you get the package with the resin.You should apply the resin first so that this epoxy clay would stick strong to the wood.This is far much better than any other product.When completely dry, the hardness is really close to the wood and it is easy to sand and to get nice surface quality.